Home ⁄ Gardening and Landscaping ⁄ The way to Build Ponds With Concrete Blocks

The way to Build Ponds With Concrete Blocks

Including a water feature to your landscape is a fantastic way to draw wildlife to your lawn and infuse your outside space with a component of tranquility that beckons one to pull up a chair and relax. If you want to add a pond to your landscape but aren’t interested in spending a great deal of time digging a hole, then an appealing above ground pond designed with concrete blocks provides the option.

Pick a level location for your pond. Don’t place your pond beneath trees that may shed leaves into the water. If you plan on using a fountain or even a pump that requires power, make confident the pond is situated close to a grounded electrical outlet.

Step half of the diameter of your pond on a piece of garden twine and cut the twine to this space. Place a stake in the ground to indicate the middle stage of the pond. Bend the measured string to the stake. Rotate the string around the stake and mark the outline of the pond by means of a rope.

Eliminate the sod, if needed, from inside the pond outline and set it apart on a tarp. Rake the excavated area until it’s smooth. If there is no sod, rake the area and remove any debris.

Lay your initial plan of conrete blocks around the roped outline.

Scatter 4 inches of crushed gravel above the pond website. Compact the gravel by means of a hand tamp. Lay a 2-by-4-inch round the gravel and use a level to verify the website is level.

Position a second path of blocks in addition to the first, offsetting the blocks so the ends are staggered.

Line the interior of the pond with roof felt and make it overhang the cinder blocks by at least 18 inches. This will definitely pad rough corners and provide a buffer for the lining.

Place the flexible pond lining within the pond, in addition to the roof felt. The lining should fully cover the exterior of the cinder blocks with a 24 inch overlap at the ground level.

Fill the pond with water.

Stack flat stones around the pond one row at a time. Arrange them so that the lining is completely covered. Fill small gaps with smaller stones, top soil or clay for a natural appearance.

See related